Hi
When I open Queue Viewer I saw this error message :
the remote pipeline has been stopped. It was running the command .....
There is alot fo email on queue .....
I find this log on system event :
Cmdlet stopped. Cmdlet Get-Message, parameters {IncludeBookmark=False, SortOrder={+LastError}, ReturnPageInfo=True, BookmarkObject=, Server=Mail.******.com, ResultSize=1000, SearchForward=True, BookmarkIndex=-1}.
Hello,
I have recently ran into a problem with my Exchange 2010 server. I can not receive emails from certain domains. There is only 2 domain names in particular (only one user from each domain has tried sending emails to our domain).
thanks in advance
I have a local Exchange 2013 running and everything works fine except for one user. When the users starts Outlook he gets an error 8004011D + 80040115, saying that the server is not reachable. He gets the same error when he tries to start Outlook from our terminal server, so it looks like it has something to do with his exchange mailbox. If I try to create a new profile on his local pc, the user gets verified without problems, but when I start Outlook I get the same error message. If I try to make a new profile with another mailbox user, it connects without problem.
The user also has outlook installed on his home pc, and this connects without problems by using Outlook Anywhere.
Jørgen Olesen
Hi,
I ran a test on MXToolbox and got
| SMTP Transaction Time | 8.331 seconds - Not good! on Transaction Time |
After reading around the forum about this I noticed I can test if this is an issue by disabling tarpitting for a short moment and run the test again.
My question is do I have to disable tarpitting for all my receive connectors or is it enough with a particular connector? I have 5 of them:
Client Frontend servername
Client Proxy servername
Default Frontend servername
Default servername
Outbound Proxy Frontend servername
e-mail will not send and receive from the public side
No changes made to SMTP connector
Just stopped working 4 days ago
Outlook web access also will get stuck in the que
Dear all,
I have a Public Folder to which mails are BCC'd by a rule. Mails from internal senders end up in the Public Folder as expected but mails from external senders (hotmail, gmail, etc.) don't.
The rule was working before I installed CU9. Now I have installed CU10 now but the problem persists.
I have checked the permissions, tried creating new rules but none of these has helped.
Can someone help me fix this problem? Thanks in advance.
Prashant
Environment
AD Windows 2008r2
Exchange 2010SP3 on Windows 2008
Exchange 2013 Productin Site + Exchange 2013 at DR site on Windows 2012r2 with CAS+MBX roles on each server
We have only few mailboxes on Exchange 2013 and all mailboxes are still homed in Exchange 2010. The strange thing is when tried accessing ECP of the DR site server it automatically redirects to the Exchange 2010 OWA instead showing its own Exchange 2013. The production site server i can access ECP on it properly.
I tried accessing using https://localhost/ecp/?ExchClientVer=15 or https://localhost/ecp/ once it authenticate it redirects to Exchange 2010 ECP. How to fix, i did restarting the Exchange 2013 in DR site but still the same. It automatically redirects to https://publicdomainurl.com/owa
Please help!
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.
Hi,
We have a exchange 2010 sp3 cu10 and exchange 2013 cu9 and migrate some user from 2010 to 2013
When exchange 2010 user send to a distribution group (which all members still in 2010), it works
But when exchange 2013 user send to distribution group:
- if the group only have few memebers, it can send to target mailbox
- if the group have many memebers (more than 1000), email will stuck in exchange 2013 and cannot route to exchange 2010. The error is "421 4.4.1 Connection time out"
Tried to change the receive connector timeout setting, and increase recipient limit by set-transportservices command but still have problem
Any idea?
Thanks
Andy Chong
After I mistakenly open my Server for Open Relay , I get Span mail filling my Submission queue , the mail are of diffent doamins and ip addresss coming from my own domain. I have done the following:
1. Closed the Relaying
2. Enabled Spam agents ( Sender,Content and receipient Filters)
Still the mail keep on besubmitted in this form
QUEUE
Identity DeliveryType Status MessageCount Velocity RiskLevel OutboundIPPool NextHopDomain
-------- ------------ ------ ------------ -------- --------- -------------- -------------
bmcmail\3 DnsConnec... Sus... 5148 -17.47 Normal 0
yahoo.com.tw
bmcmail\4 DnsConnec... Sus... 3560 -2.29 Normal 0
kimo.com
bmcmail\5 DnsConnec... Sus... 625 -0.42 Normal 0
ymail.com
bmcmail\6 DnsConnec... Sus... 199 -0.1 Normal 0
yahoo.com.hk
bmcmail\10 DnsConnec... Sus... 1 0 Normal
0 yah.com.tw
bmcmail\27 DnsConnec... Sus... 1 0 Normal
0 yahoo.coom.tw
bmcmail\30 DnsConnec... Sus... 0 0 Normal
0 yam.tw
bmcmail\34 DnsConnec... Sus... 0 0 Normal
0 hoo.com.tw
bmcmail\35 DnsConnec... Retry 43 -0.05 Normal 0
163.com
bmcmail\50 DnsConnec... Retry 1 0 Normal
0 yaahoo.com.tw
bmcmail\51 DnsConnec... Retry 36 -0.04 Normal 0
rocketmail.com
bmcmail\52 DnsConnec... Retry 1 0 Normal
0 yahoo.tw
bmcmail\53 DnsConnec... Retry 1 0 Normal
0 yahoo
bmcmail\Submission Undefined Ready 19287 -42.77 Normal 0
Submission
MASSAGE:
Identity: bmcmail\4\13018045879210
Subject: ¢eIC±±¨îÂà¯]«ö¼¯´Î¢eAlyssa
Internet Message ID: <MDTWUFNOIGOXBVRUVWLY@163.com>
From Address: afdrrcvudnvtk@163.com
Status: Ready
Size (KB): 12
Message Source Name: SMTP:Default BMCMAIL
Source IP: 118.165.147.65
SCL: 0
Date Received: 11/3/2015 12:12:54 PM
Expiration Time: 11/5/2015 12:12:54 PM
Last Error:
Queue ID: bmcmail\4
Recipients: a931111a@kimo.com;2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=BTC,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=bmcexchange,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=bmc,DC=net,DC=bw;0
Please help get rid of the submission queue for this as it is blocking my legitimate mail
Hi all, I've been asked to search for an old email in ALL the mailboxes of the organization.
I've already tried with delivery reports and message tracking log cmdlets (it's the same, and I'm limited to last 30 days)
Then I came across with this New-mailboxsearch cmdlet.
https://technet.microsoft.com/en-us/library/dd298064%28v=exchg.160%29.aspx
but when i try to find somethingit doesn't recognize the "sender" parameter.
[PS] C:\Windows\system32>New-MailboxSearch -Name "search1" -sender sender@company.com
A parameter cannot be found that matches parameter name 'sender'.
+ CategoryInfo : InvalidArgument: (:) [New-MailboxSearch], ParameterBindingException
+ FullyQualifiedErrorId : NamedParameterNotFound,New-MailboxSearch
So, is there a way to make this work? if not, is another way so search for a mail in ALL mailboxes, different than messagetracking logs, or delivery report tool?
thank you all,
PD: My version is Exchange 2013 standard.
Hi Team,
we are facing issues with some users not receiving emails from external domain.
Issue:
we received request from user that he needs additional smtp address and it needs to be primary address as well, keep old as primary address.
After making the changes user was able to receive email from internal users but not from external users. Currently we have 2 users facing this issue.
NDR message says The following organization rejected your message: mx record name
#5.2.0 smtp;550 5.2.0 mailbox unavailable.> #SMTP#.
Please advise how to fix this issue.
Thanks
Abhishek saxena
Abhishek Saxena
Hi,
is it possible to create a transport rule or anything similar to immediately move message to a file location, even before the message is processed and moved into a mailbox?
This way I want to prevent problems like full mailbox, too large messages/attachments, etc.
And also want to prevent manual interception of the messages.
Next step would be to use the messages from the file location to be processed elsewhere (ESB or similar).
Thanx for any suggestions!
Dear all,
Please help me to resolve the issue. I have been trying to clone the Edge server but an error message comes up after I perform the command bellow:
[PS] C:\installation>./ImportEdgeConfig.ps1 -CloneConfigData:"C:\installation\CloneConfigData.xml" -IsImport $false -Clo
neConfigAnswer:"C:\CloneConfigAnswer.xml"
Validation succeeded for SourceIPAddress element of type IPAddress
Validation succeeded for SourceIPAddress element of type IPAddress
Validation succeeded for Bindings element of type Bindings
Validation Failed for Fqdn element of type FQDN <--------- the error message
Answer File is successfully created: C:\CloneConfigAnswer.xml
Thus, imlementing ./ImportEdgeConfig.ps1 -CloneConfigData:"C:\installation\CloneConfigData.xml" -IsImport $true -CloneConfigAnswer:"C:\installation\CloneConfigAnswer.xml" command is not possible due to the error message above
Dear All,
Recently we have migrated from exchange server 2010 to 2013,but still we have the 2010 servers as well in our environment,We have 3 exchange 2013 DAG members two in primary site and one in DR site.
for testing my DR site, i activated one of the mailbox database on the DR mailbox server ,which has a mailbox,i found something strange ,when i send a test email from my 2010 mailbox the DR mailbox is not able to receive the email at the same time if the email is sent from 2013 mailbox the DR mailbox is able to receive the email,even external email is not reaching the DR mailbox,what could be the issue?
Regards
Abubakar Mirasa Dubai,UAE Dubai, Microsoft Specalist
Good Day,
I am have been asked by a team, that they need to have any emails going to/from certain domains to a public folder/mailbox.
EG. email@domainA.com going user@company.com >> needs to be autoforwarded to mailbox@company.com
EG. user@company.com sending email to email@domainA.com >> to store a copy of this sent email to mailbox@company.com
I know this should be achieved via mail flow settings in Exchange 2013, but I am not sure if it can be done the way they want it.
Thank you
Hi,
We have a problem where emails that we receive from an automated service contain bare linefeeds and cannot be sent to the journaling mailbox. Our Exchange server reports “Last Error: 400 4.4.7 The server responded with: 550 5.6.2 SMTPSEND.BareLinefeedsAreIllegal; message contains bare linefeeds, which cannot be sent via DATA. The failure was replaced by a retry response because the message was marked for retry if rejected.”
I fully understand why this is happening and have contacted the sender. Unfortunately they are a multi-national corporation and are showing little interest in my mail queue problem. We also have no choice but to interact with them as they are part of the industry we operate in.
My question is; Is there anything I can do to stop these messages from being archived, or is there any way I can disable the bare-linefeed check on the journal send connector? Alternatively, I'm open to any other suggestions that you may have.
Thanks in advance.
Hi everone,
We have a solution, where the user send a mail to a SMS gateway including an API key or password. Now, I want to make a rule that add this information before the message is sent to SMS gateway.
Example:
The user sends a mail to 12345678@sms.suresms.com,
After the TransportRule or AddressRewrite the recipient should look like this
12345678.SecretKey@sms.suresms.com.
We run on Exchange Online. I have tried to add TransportRule and replace header but that didnt seem to work. As far as I understand the rewriteaddress is not available on Exchange Online.
Anybody have any idea how to complete this?
Thanks
Should have been in Exchange Online, and I cannot move it :-(
Hi everyone,
We're happy to announce that TechNet forums for Exchange Server 2016 are now available! You can add them to your forum list by clicking on View all under the blue Ask a question button on the left side of the page. We have forums for:
If you have an Exchange 2016 question, please post it to the Exchange Server 2016 forum that fits best. If you have any questions about the new forums, or if you're not sure where to post your question, head on over to the Exchange Server 2016 - General Discussion forum and we'll get you sorted.
EXISTING EXCHANGE 2016 POSTS - We're moving all Exchange 2016 questions and discussions posted to the Exchange 2013 forums over to the Exchange 2016 forums. If you can't find a post you're looking for, it's probably been moved to its new home over in the Exchange 2016 forums.
Thanks for your patience and understanding as we rev up the new forums!
David.
Senior Technical Writer - Exchange. This posting is provided "AS IS" with no warranties, and confers no rights.
Hello all,
We running O365 in a Hybrid environment. We have been migrating users in small batches from our on-prem Exchange 2010 environment. With this setup emails come in to our Exchange 2010 servers first and those emails going to users on the cloud will flow to the Hybrid server 2013 and up to O365. We have had an instance where messages began to fill up on the CAS queues for the SMTP Relay to the hybrid server. We restarted the Hybrid and that resolved the backup and all was well again. We made sure updates were installed and all was good. Then the issue happened again yesterday. It began to backup and a restart resolved it. Has anyone seen this issue? Any thoughts on resolution? Thanks for the help.